0.25T/H to 50T/H RO pure water systems selected by flow rate and source water. Send water source, capacity and target quality when you want us to confirm the model.
Start with the water target. Capacity, raw water, optional modules and accessories stay inside each model page so the first choice stays simple.
Reverse osmosis pure water equipment for small equipment rooms, industrial process water and large flow export projects.
UF equipment can be used as pretreatment before RO or as a filtration stage for suspended solids and colloid reduction.
Ultrapure water equipment for high purity process water where final resistivity, conductivity or application target must be confirmed before quotation.
Purified water equipment for clean process water and water room projects where target quality, hygiene requirement and layout need engineering review.
Send source water, flow rate, voltage and target quality. We will confirm whether this model fits before quotation.
Factory direct supply, project configuration, packing and voltage checked before price.
| Parameter | Value |
|---|---|
| Method | Pretreatment + RO system |
| RO membrane Type | 8040 / 4040 |
| Capacity | 0.25-50 T/h by project |
| Flow Rate | 0.25-20 T/h standard range; 50 T/h configured by project |
| Power | 1.1-26 kW |
| Working Pressure | 0-1.5 MPa |
| Filter Life | 24-36 months |
| Warranty | 1 year for the equipment |
| RO membrane Quantity | Configured by flow rate and recovery target |
| Transport Package | Wooden box / container / bulk cargo |
| Shipping Volume | 1-80 m3 |
| Desalination Rate | 95-99% |
| Certification | CE, ISO9001, ISO14001, SGS available by project |
| Application | Confirmed by project water use |
| Materials | 304 stainless steel, 316 stainless steel, UPVC, FRP |
| HS Code | 8421219990 |
| Power supply | Three-phase: 220/380/415V 50/60Hz |
| Control Type | Manual / Auto control |
| Origin | Shandong Province, China |
| Application | Where this equipment fits |
|---|---|
| Application 1 | Electronics, electric power and chemical process water |
| Application 2 | Beverage, food, winery and drinking-water plant pretreatment |
| Application 3 | Boiler feed water, greenhouse irrigation and reclaimed water polishing |
| Application 4 | Community, industrial-zone and oilfield water purification stations |
Raw water such as tap water, well water, river water or similar feed water first passes pretreatment and precision filtration. A high-pressure pump then sends the water through the RO membrane section to produce product water. This route is normally used when one RO pass can meet the conductivity target.
Reverse osmosis uses a semi-permeable membrane and pressure higher than natural osmotic pressure to separate water from dissolved salts and other impurities.
RO membranes can reduce dissolved salts, colloids, microorganisms and organic substances. Single-stage RO is usually discussed when feed conductivity and final water target do not require a second RO pass.
As a practical reference, single-stage RO is often considered for lower-conductivity feed water and product water targets around the general pure-water range. Final design still depends on the water analysis report.
| Model range | Best fit | Selection note |
|---|---|---|
| 0.25T/H FRP RO | Small equipment room | Compact automatic FRP configuration |
| 1T/H RO | Commercial or light industrial pure water | Standard single-stage RO skid |
| 2T/H RO | Two-ton pure water projects | Common factory process water model |
| 4T/H RO | Medium production water | Expanded membrane and pump configuration |
| 5-10T/H RO | Capacity range projects | Selected after daily use and source water are checked |
| 20T/H RO | Large industrial water treatment | Higher flow membrane array and control cabinet |
| 50T/H RO | Central pure water supply | Large project configuration with pretreatment review |
Use these checks to decide whether the route is close enough before sending water data.
Send required production capacity, raw water source, water analysis report, target product water standard, application, voltage and whether installation guidance is required.
No. The model range can cover many capacities, but membrane quantity, pump, pretreatment and recovery need to be selected after source water and TDS are checked.
If the final conductivity target is stricter than a single pass can reliably reach, use a double-stage RO or RO + EDI route instead.
